3
Do not use the 3D glasses for any other purpose than for watching 3D
projection.
Parts and components
Operating Instructions
It is recommended that you charge your 3D glasses for a minimum of 3 hours before
first use, using the supplied USB/mini USB cable. (The glasses can still be used while
charging)
1.
Normal Usage
1. 1 Connect emitter to Optoma Projector
Connect the emitter to your projector’s “3D SYNC OUT” port using the supplied cable.
(2.5mm jack / VESA 3-PIN mini DIN)
NB: Ensure that your projector is connected to a compatible 3D source and that that
the “3D Sync Out” port is enabled. (This is usually automatic when 3D content is
supplied via HDMI 1.4)
1. 2 Select VESA in projector OSD
Select VESA 3D mode in projector OSD.
While searching for a 3D signal, the LEDs on the emitter will keep blinking. When a
3D signal is detected, they will turn to solid Blue.
