Optoma TX779P-3D Скачать руководство пользователя

Страница: 2 / 73

English

Safety Information

The lightning flash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of import operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THE PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE

PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Read these instructions –before using this projector.

2. Keep these instructions –for future reference.

3. Follow all instructions.

4. Install in accordance with the manufacturer’s instructions :

A. Do not block any ventilation openings. To ensure reliable op-

eration of the projector and to protect it from overheating, put

the projector in a position and location that will not

interfere with its proper ventilation. For example, do not place

the projector on a bed, sofa, carpet, or similar surface that

may block the ventilation openings. Do not put it in an enclo-

sure, such as a bookcase or a cabinet that may keep air from

flowing through its ventilation openings.

B. Do not use this projector near water or moisture. To reduce

the risk of fire or electric shock, do not expose the projector to

rain or moisture.

C. Do not install near any heat sources, such as radiators, heaters,

stoves or other apparatus (including amplifiers) that produce heat.

5. Clean only with a dry cloth.

6. Only use attachments/accessories specified by the manufacturer.

7. Refer all servicing to qualified service personnel. Servicing is required

when the projector has been damaged in any way, such as:

Power supply cord or plug is damaged.

Liquids have spilled or objects have fallen into the apparatus.

The projector has been exposed to rain or moisture, does not

operate normally, or has been dropped.

Usage Notice

Содержание TX779P-3D










































































Результаты поиска

Содержание TX779P-3D

Отзывы:

Похожие инструкции для TX779P-3D

Бренды по названию

Популярные бренды

Optoma TX779P-3D, Руководство пользователя

Результаты поиска

Содержание TX779P-3D

Отзывы:

Похожие инструкции для TX779P-3D

Бренды по названию

Популярные бренды