Installation
Warning Indicator
▀
■
When the Lamp LED indicator lights red, the projector will
automatically shut itself down. Please contact your local
reseller or service center. See pages 40.
▀
■
When the Temp LED is on a steady (not flashing) red, the
projector will automatically shut itself down. Under normal
conditions, the projector can be switched on again after it
has cooled down. If the problem persists, you should contact
your local dealer or our service center. See pages 40.
Powering Off the Projector
1. Press the
"
"
button on the remote control or
"
"
button
on the panel
of the projector
to turn off the projector. First
push of button will display the following message on the
screen.
Press the button again to confirm the shut down. If the
button is not pressed, the message will disappear in 15
seconds.
2. The Power LED flashes green and the fans will speed up
during shut down cooling cycle. The projector reaches
stand-by mode as soon as the Power LED turns red.
If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
"
"
button on the rear of the projector or
"
"
on the
remote control to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector only when the projector is in stand-by mode.
Contact the nearest
service center if the
projector displays these
symptoms. See page
54 for more information.
N
ote
N
ote
