Optoma OWM3000, Руководство пользователя, Страница: 4 / 26

≥
55mm
B
≥
55mm
Concrete wall mounting With anchor bolt
Dry-wall mounting Without anchor bolt
Ø 10
-
11mm
Ø 3mm
C
A
C
A
The arrows up
The arrows up
screw centre
When installed on the
wood stud wall, a lign the
center of the wall mount
plate with the center of
the stud.
Step 2: Attach the projector mount to the wall plate
D
C
F
The cables
The cables
The cables
Loosen the screws with L3 allen wrench,
pull out the support arm around
4'' (100mm)
and make power cable & signal cables go
through the support arm.
The cables can go through the wall plate
by three ways as shown in the pictures. Then,
t ighten the screw F after locating the position
of the projector mount period.
3
●
Insert Screw F
(
M6x15) from the fixing kit, tighten with a L5 Allen Key from fixing kit.
●
Insert Screw A
(
M6x55) from the fixing kit, tighten with a L5 Allen Key from fixing kit.
≥
100mm
≥
114mm