8
steps 1,2,3 outlined above.
In case where your BE Live2 have already stored pairing
information for eight devices and a ninth device is paired, the
stored information for the very first device will be deleted.
Power On/Power Off
To power on your BE Live2, press Power/Function button for about 2
seconds until the LED indicator flashes blue and you hear the “Power on”
when voice prompt is activated or a beep if the voice prompt is not used.
NOTE:
Once you have successfully paired the BE Live2 to a
Bluetooth
-enabled
device, the BE Live2 will automatically connect with that device once it is
powered on again. For more information check “
Bluetooth
Pairing”
section.
If you have stored pairing information for multiple devices and more than
one of those devices is
Bluetooth
enabled, the BE Live2 will automatically
connect with the most recently paired device.
To turn the BE Live2 to OFF, push Power/Function button for about 4
seconds until the LED indicator turns red and you hear the “Power off” ”
when voice prompt be activated or a beep if the voice prompt is not
used.
