7
Using your BE Live2 for first time
Pairing BE Live2 with source device
1.
Press and hold the BE Live2’s Power/Function button for 4
seconds until the LED indicator light flashes blue/red. Your BE Live2
is now in pairing mode.
2.
Turn on
Bluetooth
® on your source device, then select “BE Live2”
once it appears on the device list.
NOTE: Consult your source device’s user manual for instructions on activating
Bluetooth
.
3. Once successfully paired, the LED indicator will flash blue and
you hear “Device connected” (when voice prompt enabled) from
your BE Live2, or a beep if voice prompt is not enabled.
Please note:
A.
You must always enter “Pair” mode from a powered-off state.
Otherwise, pushing the Power/Function button for more than 4
seconds from a powered-on state turns the BE Live2 off.
B.
If left inactive in pairing mode, your BE Live2 will automatically
power off after 3 minutes.
C.
Your BE Live2 can store pairing information for up to eight
devices.
To pair additional devices to your BE Live2 ensure that your BE
Live2 is not concurrently connected to any device, then repeat the
