E
nglish
18
E
nglish
18
The Projector has multilingual On Screen Display menus that
allow you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.
How to operate
1.
To open the OSD menu, press “Menu ” on the Remote Control
or Control Panel.
2.
When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
key to enter sub menu.
3.
Use
keys to select the desired item and adjust the
settings by key.
4.
Select the next item to be adjusted in the sub menu and adjust as
described above.
5.
Press “Menu” to confirm, and the screen will return to the main
menu.
6.
To exit, press “Menu”again. If you don’t press any key, the
projector will automatically disappear after 30 seconds. The OSD
menu will close and the projector will automatically save the new
settings.
On Screen Display Menus
Main Menu
Sub Menu
Setting
User Controls
Display mode
Contrast
Brightness
Colour
Tint
Sharpness
Gamma
Language
Management
PIP
Image - I
Image - II
Image - III
Cinema Normal
Vivid
Dynamic
User
