11
E
nglish
Installation
Power Button
Powering On the Projector
1.
Remove the lens cap.
2.
Ensure that both the power cord and signal cable are securely
connected.
3.
Turn on the power and lamp by pressing the “Power” button
on the control panel. The start-up screen will be displayed in
approximately one minute.
4.
Turn on your source (computer, notebook, or video player ,
etc...); the projector will automatically detect your source.
If the screen displays “No Signal,” please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, use the “Source”
button on the control panel to select the desired source.
Powering On/Off the Projector
Turn on the
projector first
followed by the
signal sources.
Lens Cap
