USING YOUR PROJECTOR
Input Source Menu
Use
and
Buttons to select Composite Video or PC (VGA) Input. (Factory
default is composite video)
Composite Video On Screen Display(OSD)
If composite video is not detected
“Composi
te Video Source Not Found OSD
”
will appear
If this happens, please check that composite video source is plugged in and turned ON.
PC VGA On Screen Display(OSD)
If PC VGA is not detected
“
PC VGA Source Not Found OSD
”
will appear.
If this happens please check PC VGA Source is plugged in and that resolution is set to 640 x 480
@ 60 Hz or 800 x 600 @ 60 Hz or 1024 x 768 @ 60 Hz.
If PC VGA source is Apple
TM
PC then resolution should be set to 1024 x 768 @ 60 Hz.
After composite video source is connected,
“Compo
site Video OS
D”
may continue to display for
few seconds, until source detection is finished, and composite video image appears on the screen.
After PC VGA source is connected,
“
PC VGA OS
D”
may continue to display for few seconds, until
source detection is finished, and PC VGA image is appears on the screen.
GB-10
Downloaded From projector-manual.com Optoma Manuals
