53
Expand
Curved correction
Select this function to correct the projected images
with linearity uneven or vertical and horizontal bending
deformation.
Press
WX
button to adjust options.
Reset value
Select this function to make adjustment value back to
the factory default .
1) Press
WX
button to select [Reset value] option.
2) Press <OK> button.
Ɣ
Release Keystone mode.
Note:
Ɣ
After adjusting values about H/V Keystone , if users adjust Conner correction and Curved
correction, values about H/V Keystone will be reset . And after adjusting values about
Conner correction and Curved correction, if users adjust about H/V Keystone, values about
Conner correction and Curved correction will be reset also.
Ɣ
Curved correction X compensation and Curved correction Y compensation can not be adjust-
ed individually. Adjust Curved correction X compensation and Curved correction Y compensa-
tion after adjusting the X/Y Curved correction.
Ɣ
Press KEYSTONE button on the remote control,then the Keystone OSD menu appears
(includes: H / V keystone , Conner correction, Curved correction and Reset value), and press
ŸźEXWWRQWRVZLWFKWKHIRXURSWLRQV
Ɣ
Maximum Keystone range up to ±15° vertically and ±15° horizontally
.
However, the image
TXDOLW\ZLOOGHWHULRUDWHDQGEHFRHPRUHGLI¿FXOWWRIRFXV
Install the projector with the
minimal correction value.
Ɣ
The screen size will be changed with various H/V Keystone adjustments .
Ɣ
Keystone may influence image aspect .
Item
Operation
Adjustment
Curved correction
X/Y gain
Press
X
Adjust right width
Press
W
Adjust left width
Press
S
Adjust top width
Press
Ȓ
Adjust bottom width
Curved correction
X compensation
Press
X
Adjust distortion on the
right
Press
W
Adjust distortion on the
left
Curved correction
Y compensation
Press
S
Adjust distortion on the
top
Press
Ȓ
Adjust distortion on the
bottom
