45
Setting
Menu operation
Press < MENU > button on the remote controller or
on the top control panel to display the OSD menu.
Press
ST
button to select the Setting menu ,then
press <OK> or
X
button
.
1) Press
button to select reqiured item.
2) Press <OK> button.
3) Press
button to set options.
The projector has Setting fuction, you can select other functions as described
below.
Set power consumption in standby mode,no matter
whenever
your projector is operated through network
1) Press
button to select [Standby mode] menu.
2) Press <OK> button.
3) Press
button to adjust levels.
ECO mode......Some function will be disabled once
your projector is in ECO. STANDBY
mode to reduce power consumption.
Network and RS-232C serial
communication will be unavailable
except the POWER ON command
during that mode.
Normal
............Even in standby mode,there are no
restraint on network function and
serial communication function.
Standby mode
Setting menu
Standby mode
Set the power mode ON , when the power cord is
connected to a power outlet.
1) Press
button to select [
On start
] menu.
2) Press <OK> button.
3) Press
button to select reqiured item.
Off...... Get into Standby mode.
On.......Start up immediately.
On start
On start
