Optoma DLP ZU1700, Руководство пользователя

Страница: 56 / 120

English 56
USING THE PROJECTOR
Note:
After adding or removing a control point, press Enter to move to the next point
counterclockwise.
±
Brightness:
Adjust the brightness of the selected area.
± Red/Green/Blue: Adjust each color individually of the selected area.
± Reset: Reset the black level to factory default values either on the Bottom or on the Top area or
on both areas.
Memory
The projector allows the user to save up to five geometry memories, including the ones set directly on the
projector and the ones configured via external software tools. The available options are Save Memory, Apply
Memory, and Clear Memory.
Reset
Reset geometric settings to factory default values.
Edge Mask
The edge blending function allows you to hide one or multiple edges of the projected image. You can use this
function to remove the video encoding noise on the edges of the video images.
Freeze Screen
Select to pause the display screen despite any change in the source device.
Test Pattern
Select a test pattern. The available options are Off, Green Grid, Magenta Grid, White Grid, White, Black, Red,
Green, Blue, Yellow, Magenta, Cyan, ANSI Contrast 4x4, Color bar, and Full screen.
PIP/PBP
PIP/PBP (picture in picture/picture by picture) allows simultaneously displaying two images from two input sources.
Screen
Select the appropriate PIP/PBP mode or disable the function.
‡ Off: Disable PIP/PBP mode.
‡ PIP: Display one input source on the main screen and the other input source in an inset window.
‡ PBP: Display two images of the same size on the screen.
Main Source
Select an input source for the main image. The available input sources are VGA, HDMI1, HDMI2, DVI-D,
DisplayPort, 3G-SDI, and HDBaseT.
Sub Source
Select an input source for the second image. The available input sources are VGA, HDMI1, HDMI2, DVI-D,
DisplayPort, 3G-SDI, and HDBaseT.
Swap
Swap the main source and sub source.
Size
Change the display size of the sub source in PIP mode.