Optoma 4K500, Руководство пользователя, Страница: 31 / 60

English 31
USING THE PROJECTOR
‡ Blackboard : This mode should be selected to achieve optimum color settings when projecting onto a
blackboard (green).
‡ DICOM SIM. : This mode can project a monochrome medical image such as an X ray radiography,
MRI, etc.
Color Settings
Configure the color settings.
‡ BrilliantColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
‡
Color Temperature
: Select a color temperature from D55, D65, D75, D83, D93, or Native.
‡ Color Gamut : Select an appropriate color gamut from Native, HDTV, Presentation, Cinema, or Game.
‡ CMS (Color Management System) : Select one of the colors (R/G/B/C/Y/M/W) to adjust its x/y offset
and brightness.
± Color: Select between red (R), green (G), blue (B), cyan (C), yellow (Y), magenta (M), and
white(W) color.
± x offset: Adjust the x offset value of the selected color.
± y offset: Adjust the y offset value of the selected color.
± Brightness: Adjust the brightness value of the selected color.
± Reset: Return the factory default settings for color adjustments.
± Exit: Exit the “CMS” menu.
‡ RGB Gain/Biase: This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the “RGB Gain/Bias” menu.
‡
Color Space (non-HDMI input only)
: Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
‡ Color Space (HDMI input only) : select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
Signal
Adjust the signal options.
‡ Automatic : Configure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
‡ Frequency : Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to flicker vertically.
‡ Phase : Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or flickers, use this function to correct it.
‡ H. Position : Adjust the horizontal positioning of the image.
‡ V. Position : Adjust the vertical positioning of the image.
‡ Exit : Exit the “Signal” menu.
Lens Iris
Adjust the Lens Iris. Lens Iris is an aperture structure in lens and it can change the amount of light output.
Dynamic Contrast
Dynamic Contrast enables the projector to automatically optimize the brightness of the display during dark / light
movie scenes to be shown in incredible detail.