OPTO-EDU A15 0908 Series, Инструкция по эксплуатации

Страница: 20 / 24

17
A15.0908 Series
3-19-3 Assemble the Photography Device
(1) Loosen the lock screw
①
of trinocular head,
take out the dust-cover ② . (See Fig. 37)
(2) Insert the photography device into the trinocular
head as shown in the figure, and screw down the
lock screw
①
.
(3) Loosen the lock-screw
③
of the photography
adapter and take down the photography adapter ④
(See Fig. 38).
(4) Insert the 3.2X photography eyepiece
⑤ into
the eyepiece base
⑥
, install the photography
adapter
④
and tighten the lock-screw
③
.
(5) Do binocular observation, after the image is
clear, pull the light path selecting pole
⑦
to the
outmost, then operate the photography device
according to its instructions.
3-20 Use the Digital Viewing Head
3-20-1 Connect the Power Cord
Insert the output connector of the transformer into
the power socket
② on the back of the head, insert
the video cable into the C-Video video output
port/USB port
③ on the back of the head. (See Fig.
39)
★
When using the digital viewing head, the
power supply is provided by USB.
3-20-2 Signal Output
Pull the light path selecting pole
①
of viewing
head to the outmost, which can do projection of
both the binocular and TV at the same time, with
the light ratio of 80:20. Push the light path selecting
pole to the innermost, 100% of the light can enter
the binocular observation system. (See Fig. 39)
Fig.37
Fig.38
Fig.39