10
Chapter 3 Regulation and Operation A16.1065
3.1 Turning the Power on
Turn on the power and turn the main switch on
the back of the microscope body to "-" (on).
3.2 Adjusting the Illumination Brightness
As shown in the direction of rotation, the light
source is enhanced, whereas the light source
weakened
.
3.3 Specimen Placement and Stage Knob
Adjustment
Load the slide holder into a mechanical stage,
and the cover glass slides downward slowly
into the grooves of the slide plate.
Rotate the stage knob to place the sample to
the desired position.
CAUTION
Be careful when changing the objective. The
objective may collide with the specimen,
because of the short working distance of
specimen observation.
3.3.1
Movving stage
The Movving stage is mounted and used on
the plain stage. The specimen can be moved in
the X-axis and Y-axis directions by operating
the stage knobs.
A 128
×
80 mm microplate can be placed on
the Movving stage. Attaching the different
specimen holders enables you to observe
various types of specimens.
The upper is the vertical knob, and rotates in
the direction as shown in the figure, the stage
will move forward in the vertical direction.
The lower is the horizontal knob rotating in the
direction shown in the figure. The stage will
move to the left in the horizontal direction.
Power switch
