2
5. Grounding the machine to avoid lightning strike.
6.
To ensure safety, always make sure the main switch is in "O"
(disconnecting) and cut off the power while waiting for the LED lights
and the lamp room to cool completely. Input voltage check: the input
voltage indicated on the back of the microscope is consistent with the
supply voltage, otherwise the microscope will be seriously damaged.
7. Use the our company dedicated wire.
8. When carrying this product, one hand should firmly hold it by gripping
the recess in the front lower part of the main body and the other holds
the recess in the rear of the main body.
★
Do not hold any other parts (such as the upper part of the illumination pillar, focus
knobs, eyepiece tube, or stage) when carrying the microscope. Doing so might result in
dropping or failure of this microscope.
Care and Maintenance
1.
All lenses have been calibrated, please do not disassemble by yourself.
2.
The structure of objective converter and coarse and fine focus
mechanism are precise, please do not disassemble easily.
3.
The instrument should be kept clean, have to regular removal of dust,
special attention should be paid to do not contaminate the optical parts
when cleaning.
4.
The stain of the lens, such as fingerprints and grease can be wiped with
a small amount of ethyl ether (70%) and alcohol (30%) mixed solution.
Recess in the rear
Recess in the front lower part
F
F
