OPTO 22 G4LC32ISA-LT, Руководство пользователя

Страница: 13 / 50

G4LC32ISA-LT User’s Guide 2-1
QUICK START
OVERVIEW
This chapter provides a brief explanation of how to get the G4LC32ISA-LT up and running on a PC
using a hard-wired RS-485 host port connection to I/O units. If you are installing the G4LC32ISA-LT in
an environment that is networked, uses multiple hosts, or uses modems, refer to Chapter 3 for
detailed instructions.
A quick start installation consists of the following steps:
1. Unpack the G4LC32ISA-LT
2. Check the configuration jumpers
3. Connect the battery
4. Install into a host PC
5. Verify the G4LC32ISA-LT is communicating properly
PACKING LIST
When removing the G4LC32ISA-LT from its packaging, make sure the following components are
included:
Component Use
Extra jumpers
Can be installed as G4LC32ISA-LT configuration
jumpers
Two RS-232/RS-485 seven-position
connectors
Connect wiring to serial ports COM 0 and COM1
Connector key disk, containing six
connector keys Prevents non-keyed connectrors from plugging
into the serial port
G4BATT32 battery RAM backup battery
Battery replacement label Record the battery’s installation date
Four floppy disks
1. Cyrano Kernels and Firmware Utility
(P/N 8885)
2. OptoKernels (P/N 8884)
3. & 4. Two OptoUtilities disks (P/N 8848)
1. Contains Cyrano-compatible firmware and
DOS download utility
2. Contains OptoControl-compatible firmware
3. & 4. Contains Win 95/NT download utility
Note: If any of the above items are missing or damaged, contact Opto 22 Product Support
immediately at 1-800-835-6786 (or 909/695-3080).
CHAPTER 2 CHAPTER 2