OPTO 22 B3000-B, Руководство пользователя

Страница: 24 / 26

MAINTAINING THE BRAIN
B3000-B Serial Brains User’s Guide 20
Resetting the Brain
1. Carefully insert a straightened paperclip or stiff wire into the small hole labeled RESET.
2. Depending on the type of reset you need, press and hold down the RESET button as described below.
DO NOT hold the button down too long.
NOTE: Do not reset the brain to hardware test mode unless Opto 22 Product Support tells you to.
LED Indicators and STAT LED Blink Codes
Three LEDs on the top of the brain (STAT, SERIAL, and IRQ) indicate status conditions.
The STAT LED color and blink pattern
provide useful information during operation and in troubleshooting as follows:
Green
If the STAT LED is on and remains green , the brain is operating normally.
If the STAT LED blinks green when the brain starts up , it indicates the following:
Orange
If the STAT LED blinks orange fast and continuously after you pushed the RESET button, the device is in
hardware test mode (see
page 20) .
Reset type How to use the reset button What happens Notes
Simple reset Press and release immediately
Brain restarts.
Files in RAM are erased. Files in flash mem-
ory are untouched.
Restore factory
defaults Press just until STAT LED turns
solid green (1-2 sec)
Brain restarts.
Files in RAM and flash memory are erased.
I/O configuration in flash is erased.
Failsafe bootloader
mode
Press and wait until LED turns
solid green. Release when LED
starts to blink (2-5 sec) Brain restarts.
Files in RAM are erased. Files in flash mem-
ory are untouched.
Cycle power to recover. Result
is the same as a simple reset.
Hardware test mode
Press and hold until LED starts
blinking orange rapidly and con-
tinuously (> 5 sec) Brain restarts.
Files in RAM and flash memory are erased.
I/O configuration in flash is erased. Cycle power to recover. Result
is the same as restoring to fac-
tory defaults.
LED Indicates
STAT Brain status
SERIAL
Green
Red
Amber = Transmit
= Receive
= Transmit/Receive
IRQ mistic interrupt currently active.
Number of
Blinks
Speed of
Blinks
Means
2 fast Normal; the brain’s firmware is starting up.
5 fast Default settings have been successfully restored.
7 fast
Entering failsafe bootloader mode. (See “Resetting the
Brain” on page 20 for more information.)
SERIAL
STAT
IRQ