Optiview HDB2MVF, Руководство пользователя

Страница: 26 / 36

19
3.3 Lens Adjustment
Turn counter clockwise to remove the lens cover, now you can see the iris front and rear control rod.
The front control rod is to focus and the rear control rod is to zoom. See Figure 3-5. Please turn
clockwise to fix the lens cover back firmly.
Important

Please remove the sunshield first and remove the lens cover if you can not unfasten the lens
cover.

The lens cover has the waterproof function. Please make sure it is secure after you complete the
lens adjustment.

The motorized zoom lens series product has the default motorized zoom lens. You do not need to
adjust manually.
Figure 3-5
3.4 Bracket Adjustment
You can use a M4 inner hex screw to control the bracket. Please use the inner hex wrench from the
installation accessories bag to unfasten the screw. See Figure 3-6 (For manual zoom lens series
product only) or Figure 3-7 (For motorized zoom lens series product only).The horizontal angle of the
rear cover can rotate 360°, the tilt angle can rotate 90° and the chassis can rotate 360°.
Please use the inner hex wrench to secure the screw firmly after you complete the setup.
Important

Please make sure the M4 inner hex screw is firm, otherwise it may result in chassis vibration and
the camera can not fix to a specified angle.