Last edited: Jim B 1/14/2019
Created: jim b
2.2
Connection diagram for preliminary setup
The PoE port from the DC power adapter is connected to the RJ45 port of the wireless bridge
(LAN1 POE), and the LAN2 port of the power adapter is connected to terminal devices such as
PC or any IP device such as IP camera or DVR/NVR.
Figure 1.0
3. Login WEB interface
3.1
Directly connect the PC and the network cable from the POE injector as shown on figure# 1.0
below, configure your laptop computer with an IP address within the network segment, for
example 192.168.248.251 and the corresponding subnet mask, 255.255.255.0
