IR Speed Dome User Manual
17
the last line refers to the task No.8.
7.
Task Clean
.
Move the cursor to
TASK
CLEAN
and click
IRIS+
to delete the time and action of the current task.
3.2.8
Configuring the Privacy Mask
Purpose:
Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the
surveillance area from being live viewed and recorded. The masked areas can move with the pan/tilt
movements and automatically adjust the size as the lens zooming in/out.
Steps:
1.
Move the cursor to enter the privacy mask configuration interface:
MAIN MENUS > DOME SETUP > PRIVACY MASK
Figure 3-16
Privacy Mask Configuration Menu
2.
Choose the
Privacy Mask Number
.
Steps:
(1)
Move the cursor to
BLANK NUM
and click
IRIS+
button to enter edit mode.
(2)
Click the up and down direction buttons to select the number of the pattern which is to be
configured.
(3)
Click
IRIS+
again to confirm and exit edit mode of this column.
Note:
The configurable privacy mask numbers vary depends on the camera models.
3.
Set the
Blank Status
.
Enter the
BLANK STATUS
interface and click the up and down direction buttons to set it
ON
or
OFF
.
Note:
If no privacy mask has been configured, you cannot set the status as
ON
. If the privacy
mask is configured, the status will be set as
ON
automatically.
4.
Configure the
SET BLANK
.
Steps:
(1)
Move the cursor to
SET BLANK
and click
IRIS+
button to enter edit mode. You will see a
purple privacy mask on the live window.
