IR Speed Dome User Manual
5
Figure 3-2
Dome Setup
3.2.1
Configuring the System Parameters
Purpose:
You can check and also edit the system information of the software address, baudrate, system time,
etc. on the system information settings menu.
Enter the system information settings menu:
MAIN MENUS > DOME SETUP> SYS PARAM SETUP
Figure 3-3
System Information Settings
Note:
You can click the left and right direction buttons in the PTZ control panel via the IE browser of
the DVR to enter the next page and return to the previous page of the submenu if more than one
page is available.
Descriptions of system parameter configuration:
Soft Address Settings
If the
SOFT ADDR
is set as
ON
, the soft address is the valid address for connecting to the IR
speed dome. The selectable soft address range is from 1 to 255;
If the
SOFT ADDR
is set as
OFF
, the hard address set by the DIP switch is the valid address of the
speed dome (the hard address is set as 0 by default).
Notes:
1.
Before you set the soft address of the speed dome, you need to confirm the control range of
