User Manual – eSX
OptiPro Systems, LLC.
Page 25 of 111
Last Modified: 8/27/2014
5.8
Tool Spindle & Tool Holder Precautions
Observe the following to avoid injury or equipment damage:
This machine uses the HSK 63F style tool interface. Only use tool holders conforming to the
HSK 63F standard.
Figure 5-18: HSK 63F Tool Holder profile.
For machines NOT EQUIPPED with Coolant-Through-Spindle (CTS), only use tool holders
WITHOUT through-holes or those with plugs. Thread-in plugs can typically be purchased
from the tool holder manufacturer.
Figure 5-19: HSK 63F Tool Holder back end with threaded plug installed.
