Figure 3: SIM card holder
(7) Connect the external antenna (or SMA connector cable for test equipment) to the RF connector on
the module.
Figure 4: RF connector on the module
(8) Connect the headset into the audio jack (MODULE WILL ALSO WORK PROPERLY EVEN
WITHOUT THIS JACK). Next, (9) connect the power supply plug (the adapter should already be
connected to the mains) to the evaluation platform. And when you are ready you can (10) connect the
USB cable from the GTM cradle to your PC. At this point your module should be detected by the host
PC.
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
