UMX-CC version 1.0
10
AUDIO IP MANAGEMENT CARD
FOR UMX-02/0 MODULAR MATRIX
UMX-CC
R&D Department
3.4.
Configuration of the parameters of the UMX-CC card
(1)
Slot
Position occupied by the card in the
UMX-02/0 chassis.
(2)
Name
Enter a name to identify the equipment unit. Maximum of
50 characters.
IP DATA
(3)
IP address
IP address of the UMX-CC card. This must coincide with
the configuration of the DIP switches of the card or with
the address configured through the Web connection. It
must be a fixed IP address.
(4)
Netmask and (5) Gateway
In installations that require this. Consult the network
administrator of the installation
MULTICAST DATA
(also see page 10))
(6)
IP Multicast
Default setting 239.5.5.5. Do not modify this field unless
the installation topology makes it necessary. All the units
with an IP connection in the installation must have the
same IP multicast address.
(7)
Multicast port
Default setting 5000. Do not modify this field unless the
installation topology makes it necessary. All units with an
IP connection in the installation must have the same
multicast port.
(8)
Send “Heart Beat” every (n) seconds
Frequency with which the unit sends a heart beat signal to the multicast group. This signal informs the
other equipment units in the installation that the system is operating perfectly.
(9)
Local Manager and (12) Global Manager
Defines whether the UMX-CC card is to function as a priority manager of the Optimax system, either
locally at PA Area level or globally for the installation, and establishes the priority of this management
with respect to other equipment units (1 = maximum priority). See
Notes on Local and Global Co-
ordinators
on page 12.
(2)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(3)
(1)
