OPERATING INSTRUCTIONS:
SETTING UP
•
Carefully remove your fan from the box (please save the carton for off-season storage).
•
Make sure the unit is in the OFF position before plugging the unit into the outlet.
ASSEMBLY INSTRUCTIONS (refer to the picture)
1)
Make sure four hole of front and back base in straight alignment, Put hole of back base
insert to cylinder of front base.
2)
Take out the power cord from the central of base.
3)
Assembled base of central have four pieces of screw hole which fix into the screw holes of
body ,use 4 pieces of tapping screw, fix closely the body and base. Finally take the power
cord into the line hole.
4)
Put the fan flatly.
FUNCTIONS & OPERATION
Put the plug into the socket, products in standby mode, power lamp light on the display panel.
FAN ON/OFF button:
Push it to start working, fan works in middle speed. Display panel
shows the room temperature. Indicator light shows on/off at the display panel.
SPEED button: Push this button to set from LOW-MIDDLE-HIGH. Indicator light shows on
the display.
OSCIL button :
Push it to oscillate the fan, push it again to stop the function. Indicator light
shows on/off at the display panel.
TIMER button:
Push it to set from 00-12 hours. Display panel shows the timer numbers and.
Indicator light shows on/off at the display panel.
LIGHT ON/OFF button:
Push it to turn on and off the lights on the display panel. The
Speaker light (The Ring) can not be turn off by this button
Bluetooth button:
Push it to turn on and off the speaker. The connect name on your
bluetooth equipment is TH-817EM. The Speaker light (The Ring) turns on in front of the fan.
Indicator light shows on/off at the display panel.
REMOTE CONTROL
FAN ON/OFF TIMER LIGHT ON/OF OSCIL SPEED BLUETOOTH
The function is same as on control panel
The remote control use one button cells, model No. CR2025 (3V). We recommend the use of
Lithium type battery for longer use.
Note: Please follow battery disposal instruction on battery packaging, or contact your
local councils for safely disposal of batteries.
CLEANING
During Season Care:
•
Before cleaning, be sure to turn off and unplug the unit.
•
Keep the fan clean. Carefully wipe the unit with a soft, damp cloth. Please be very cautious
near the motor.
•
DO NOT immerse the fan in water and never allow water to drip into the Motor Housing.
•
Never use gasoline, benzene or thinner. This will damage the surface of the unit.
•
After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
•
Your fan can be stored in the off-season.
•
Before putting the fan in storage, clean it thoroughly, cover it with a vinyl bag, and store it
in a cool and dry place. We recommend using the original (or appropriately sized) box.
