17
11. Place the ilter (11) into the juice collection container (2).
12. Slide the food pusher (9) down the food chute. The pusher
can only it one way.
Before using the appliance, make sure that the basket (6)
is not damaged. In such case, replace with original spares.
13. Prepare the food to be processed by cutting it into
suitably sized pieces so they can be inserted in the little
food introduction chute of the hopper (8). Other fruit or
vegetable only need to be put into the pusher hole for
making juice.
Apples or other fruit with diameter less than 75 mm can
be inserted directly into the big food introduction hole.
Remove seeds and stones from fruits.
14. Connect the appliance to the mains socket, ensuring that
the mains data matches that shown on the data plate on
the appliance.
15. Start the appliance pressing the starting switch (11) to
“ON” position.
16. Put into the food introduction chute on the hopper (8) the
food cut and prepared earlier (see “Tips” paraghaph).
17. To facilitate the blending operation use the food pusher
(9) to press the food against the blade in the ilter basket
without forcing it.
18. Check that the cap (4c) is open.
Never press the food down with ingers or other tools
(spoon, fork,etc.). Always use the food pusher provided
(9)
.
220-240 V~ 50/60 Hz
