OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0 dated 2015-06-18
Page 12
Original operating instructions
S275N | S275NV
GB
INFORMATION
Organise the checks according to the following table;
1.10
Personal protective equipment
For some works you need personnel protective equipment as protective equipment. This
includes:
Safety helmet,
protective glasses or face guard,
protective gloves,
safety shoes with steel toe caps,
ear protection.
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause illness.
Clean your personal protective equipment
after each use,
regularly once a week.
Personal protective equipment for special works
Protect your face and your eyes: Wear a safety helmet with facial protection when performing
work where your face and eyes are exposed to hazards.
Wear protective gloves when handling pieces with sharp edges.
Wear safety shoes when you assemble, disassemble or transport heavy components.
General check
Equipment
Check
OK
Guards
Mounted, firmly bolted and not damaged
Signs,
Markers
Installed and legible
Date:
checked by (signature):
Functional check
Equipment
Check
OK
EMERGENCY-Stop
button
When the EMERGENCY-Stop push button is activated, the metal
belt saw must switch off.
Position switch
Protective cover saw
arch
The metal belt saw only switches on when the protective cover is
being closed.
Date:
checked by (signature):
