OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.3.0 dated 2016-12-16
Page 21
Translation of the original instructions
MF2 Vario
GB
MF
2
V
_3_
GB.
fm
Raise the multi-milling machine, preferably using the eye bolt (1) located on the spindle
head holder.
Img.3-1: Lifting the machine using the eye bolt or a sling
Alternatively, the multi-milling machine can be Abbildung 3-1 raised using a sling, as indi-
cated.
The cross table has to be completely travelled to the stand.
The spindle head carrier must be positioned as illustrated.
The four clamping screws (A) of the spindle head-holder must be tight.
3.4
Installation and assembly
3.4.1 Installation site requirements
Organise the working area around the multi milling machine according to the local safety regu-
lations.
INFORMATION
In order to achieve high levels of functionality and machining accuracy, as well as a long service
life of the machine, the set-up location should meet certain criteria.
The following points should be noted:
The device must only be installed and operated in a dry and well-ventilated place.
Avoid places close to machines which cause chips or dust.
The installation site must be vibration-free, i.e. located away from presses, planing
machines, etc.
The foundation must be suitable for the multi milling machine. Make sure that the floor has
sufficient load-bearing capacity and is level.
The ground must be prepared in a way that potential coolants cannot penetrate the floor.
Any parts sticking out such as stops, handles, etc. have to be secured by measures taken
by the customer if necessary in order to avoid endangering persons.
Provide enough space for set-up and operating personnel and material transport.
Also bear in mind accessibility for installation and maintenance works.
Ensure adequate lighting is available (minimum value: 500 Lux, measured at the tool tip). In
the event of a lower level of lighting, additional illumination must be provided, e.g. by means
of a separate workplace light.
3.4.2 Installation
Check that the foundation is horizontal with a spirit level.
1
