OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.3.0 dated 2016-12-16
Page 17
Original operating instructions
MF2 Vario
GB
2
Technical data
The following information gives the dimensions and weight and is the manufacturer‘s
authorised machine data.
2.1
Electrical connection
Total connection rate
3 x 400 V; 50 Hz; 1.5 KW
Degree of protection
IP 54
2.2
Dimensions
Taper
ISO 40 (DIN 2080, DIN 69871)
Spindle sleeve diameter
Ø 85.7 mm
Clamping surface of cross table
230 x 1244 mm
Max. dist. from spindle head to table
446 mm
Max. dist. from centre of spindle to upright
680 mm
Min. dist. from centre of spindle to upright
200 mm
Height
2150 mm
Width
1400 mm
Depth
1450 mm
Total weight
900 kg
Max. load of cross table
230 kg
Number of the T-slots
3
Size of the slot nut
16 x 63 mm
Throat depth
213 - 533 mm
2.3
Milling capacity / removal
MF2 Vario
End-milling cutter ø18
6 mm
Face milling cutter ø76
2.5 mm
2.4
Adjustment travels / swiveling range
Spindle sleeve travel
127 mm
Adjustment travel of cross table (X-axis)
800 mm
Adjustment travel of cross table (Y-axis)
305 mm
Vertical adjustment travel of cross table
406 mm
Swivel range spindle head carrier
± 90°
Up/down spindle head inclination
± 45°
