Optimum MKWG-20, Руководство по эксплуатации

Страница: 22 / 26

22
Countertop Installation
Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if
oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface.
Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron.
Installation
1.Select a level surface that provide enough open space for the
intake and/or outlet vents.
(1) The minimum installation height is 85 cm.
(2) The rear surface of appliance shall be placed against a
wall. Leave a minimum clearance of 30 cm above the
oven, a minimum clearance of 20 cm is required between
the oven and any adjacent walls.
(3) Do not remove the legs from the bottom of the oven.
(4) Blocking the intake and/ or outlet openings can damage
the oven.
(5) Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to
your radio or TV reception.
2. Plug your oven into a standard household outlet. Be sure the
voltage and the frequency is the same as the voltage and the
frequency on the rating label.
WARNING: Do not install oven over a range cook--
top or other heat-producing appliance. If installed
near or over a heat source, the oven could be dam-
aged and the warranty would be void.
The accessible surface may
be hot during operation.
Operation Instructions
This microwave oven uses modern electronic control to adjust
cooking parameters to meet your needs better for cooking.
CLOCK SETTING
When the microwave oven is electrified,the oven will display
“0:00”, buzzer will ring once.
1. Press “CLOCK/PRE-SET“, the hour figure flash;
2. Turn “
“ to adjust the hour figures, the input time should
be within 0–23.
3. Press “CLOCK/PRE-SET“, the minute figures will flash.
4. Turn “ “ to adjust the minute figures, the input time should
be within 0–59.
5. Press “CLOCK/PRE-SET” to finish clock setting. “ : ” will
flash.
Note:
1) If the clock is not set, it would not function
when powered.
2) During the process of clock setting, if “CLOCK/
PRE-SET” is not pressed, no operation in 1 mi -
nute, the oven will go back to the previous sta-
tus automatically.
MICROW AV E COOKING
1. Press the “MICRO/GRILL /COMBI“ key once, and “P100”
display.
2. Press “MICRO/GRILL/COMBI” repeatedly or turn “ “ to
select the microwave power “P100”, “P80”, “P50”, “P30”,
“P10” will display in order.
3. Press “START/+30SEC./CONFIRM “ to confirm.
4. Turn “ “ to adjust the cooking time. (The time setting
should be 0:05–95:00.)
5. Press “START/+30SEC./CONFIRM“ to start cooking.
NOTE:
the step quantities for the adjustment
time of the coding switch are as follow:
0–1 min : 5 seconds
1–5 min : 10 seconds
5–10 min : 30 seconds
10–30 min : 1 minute
30–95 min : 5 minutes
Microwave Power Chart
Microwave
Power
100% 80% 50% 30% 10%
Display P100 P80 P50 P30 P10
GRILL COOKING
1. Press the “MICRO/GRILL /COMBI” key once, and “P100”
display.
2. Press “MICRO/GRILL/COMBI” repeatedly or turn “ “ to
select the grill power .
20cm
30cm
20cm
min85cm
0cm