OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
Version 1.0 dated 2015-03-31
Page 21
Original operating instructions
DPA22
GB
3.3
Reference marker function
Set a zero point with preset axis values Set a relative coordinate system based on current
machine position
Press the button
to activate the reference marker function.
The display shows
, blinking, along with the preset axis values.
Press the button
to exit from the reference marker settings.
The set reference mark values are now transferred to the axis display.
Example:
Setting the values.
After pressing the reference mark function, the following values should be set: 0.500 for the X-
axis, 10 for the Y-axis, and 0 for the Z-axis.
Press the following keys in the order shown in order to set these values.
3.4
Machine zero point function
For the setting of an absolute zero point.
Press the button
. The display shows
.
The axis values shown for the current machine position are reset to zero. Values for the axes
may also be input where needed.
When the machine zero point is turned off, the previous values are shown again.
REF
