8
• Use solely the base supplied with the jug kettle. Never use the base for other purposes.
• Remove the jug from the base, and fill with water from the tap. Never fill the jug above the ”max“
level.
• Do not switch on the appliance before you have filled it with water. Fill only with cold water.
• The jug’s lid must remain securely closed whilst the appliance is in use.
• Never open the lid when the water is still boiling.
• Use the appliance only to boil or heat water. Never use it for other liquids!
• Fill the jug kettle with at least 0,5 litre of water.
• Allow the appliance to cool to room temperature before storage
• This appliance may not be used through an external timer or by means of a remote control.
4
1
2
3
7
5
6
OPERATION
The appliance is intended only for domestic use, not for
professional use.
FEATURE
1.Top lid
2. Spout
3. Kettle body
4. Base
5. Handle
6. Water lever indicator
7. On/off switch with pilot light
BEFORE USE FOR THE FIRST TIME
Before first use, remove possible manufacturing process
residues by boiling 3 full kettles of water. Dispose this
water.
Tip: You can use vinegar or special descaling
agents for the first time.
USE
1. Turn the jug so that the spout faces away from you.
2. Open the lid.
3. Fill the jug with the required quantity of water (at least 0.5
liters, and a maximum of 1.7 liters). Never fill the water
boiler over the “MAX”. Otherwise the hot water can spatter
out of the base.
ATTENTION
Make sure that you do not spill any water on the
base.
4. Put on the cover accurately.
5. Place the jug on the base, and insert the plug in the wall
socket. Push down the on/off switch. The on/off pilot light
will illuminate.
6. The jug kettle is now switched on, and the water will now
begin to heat. The jug kettle switches off automatically a few
seconds after the water has come to the boil. The on/off pilot
light will now extinguish.
7. Remove the jug from the base by the handle, and pour the
water out.
ATTENTION
Be carefully you do not contact the hot water. It
can cause serious burning wounds
8. When you wish to heat the water without it coming to the
boil you can switch off the jug kettle at any time you require.
9. Remove the plug from the wall socket when you have
finished using the jug kettle.
OVERHEATING SAFEGUARD
The jug kettle is fitted with an overheating safeguard. This will
switch off the jug kettle if it is operated without (sufficient)
water. Allow the jug kettle to cool down for at least 10 minutes
before using it again.
CLEANING AND MAINTENANCE
• Remove the plug from the wall socket, and allow the appli-
ance to cool.
• Clean the jug with a damp cloth. Never immerse the appliance
in water. Never put the appliance in a dishwasher. Make sure
that the electrical connections do not become damp.
