OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 3.1.8 dated 2015-1-27
Page 8
Original operating instructions
BF20V
US
1.3
Proper use
WARNING!
In the event of improper use, the mill drill
there may be a risk to the staff,
the mill drill and other material property of the operating company will be endan-
gered,
the correct function of the mill drill may be affected.
The mill drill is designed and manufactured to be used for milling and drilling cold metals or
other non-flammable materials or materials that do not constitute a health hazard by using com-
mercial milling and drilling tools.
The mill drill must only be installed and operated in a dry and well-ventilated place. If the mill
drill is used in any way other than described above, modified without the approval of the com-
pany Optimum Maschinen Germany GmbH then the mill drill is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We would like to stress that any modifications to the construction or technical or technological
modifications that have not been authorised by the company Optimum Maschinen Germany
GmbH will also render the guarantee null and void. It is also part of proper use that
the maximum values for the mill drill are complied with,
the operating manual is observed,
the inspection and maintenance instructions are observed.
"Technical data“ on page 15
WARNING!
Heaviest injuries through improper use.
It is forbidden to make any modifications or alterations to the operating values of the mill
drill. These could endanger the staff and cause damage to the mill drill.
ATTENTION!
If the mill drill is not used as intended or if the safety directives or the operating
instructions are ignored the liability of the manufacturer for any damages to personnel
or objects resulting hereof is excluded and the claim under guarantee is becoming null
and void!
1.4
Reasonably foreseeable misuses
Any other use as the one determined under the "proper use" or any use beyond the described
use shall be deemed as not in conformity and is forbidden.
Any other use has to be discussed with the manufacturer.
It is only allowed to process metal, cold and non-inflammable materials with the milling-
machine.
In order to avoid misuses it is necessary to read and understand the operating instructions
before the first commissioning.
The operators must be qualified.
1.4.1 Avoiding misuses
Use of suitable cutting tools.
Adapting the speed adjustment and feed to the material and workpiece.
Clamp workpieces firmly and vibration-free.
