Optimum BF20 V Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 54

background image

OPTIMUM

M A S C H I N E N - G E R M A N Y

Version 3.1.8 dated 2015-1-27

Page 4

Original operating instructions

BF20V

US

Preface

Dear customer,

Thank you very much for purchasing a product made by OPTIMUM.

OPTIMUM metal working machines offer a maximum of quality, technically optimum solutions and convince
by an outstanding price performance ratio. Continuous enhancements and product innovations guarantee
state-of-the-art products and safety at any time.

Before commissioning the machine please thoroughly read these operating instructions and get familiar with
the machine. Please also make sure that all persons operating the machine have read and understood the
operating instructions beforehand.
Keep these operating instructions in a safe place nearby the machine.

Information

The operating instructions include indications for safety-relevant and proper installation, operation and main-
tenance of the machine. The continuous observance of all notes included in this manual guarantee the safety
of persons and of the machine.

The manual determines the intended use of the machine and includes all necessary information for its eco-
nomic operation as well as its long service life.

In the paragraph "Maintenance" all maintenance works and functional tests are described which the operator
must perform in regular intervals.

The illustration and information included in the present manual can possibly deviate from the current state of
construction of your machine. Being the manufacturer we are continuously seeking for improvements and
renewal of the products. Therefore, changes might be performed without prior notice. The illustrations of the
machine may be different from the illustrations in these instructions with regard to a few details. However,
this does not have any influence on the operability of the machine.
Therefore, no claims may be derived from the indications and descriptions. Changes and errors are reserved!

Your suggestion with regard to these operating instructions are an important contribution to optimising our
work which we offer to our customers. For any questions or suggestions for improvement, please do not hesi-
tate to contact us.

If you have any further questions after reading these operating instructions and you are not able to
solve your problem with a help of these operating instructions, please contact your specialised
dealer or

LDS Industries, LLC
930 W. National Ave.
Addison, IL 60101
Tel.: 1-630-785-6437

«
...
2
3
4
5
6
...
»

Содержание BF20 V























































Отзывы:

Нет отзывов

Похожие инструкции для BF20 V

Бренд: FCMP OUTDOOR Страницы: 4

Бренд: Yoder Smokers Страницы: 44

Бренд: Maktec Страницы: 32

Бренд: GREAT PLAINS Страницы: 50

Бренд: Fri-Jado BV Страницы: 24

Salamander GL163-N

Бренд: THOR Страницы: 17

Бренд: Char-Broil Страницы: 32

Бренд: Dyna-Glo Страницы: 87

Бренд: Weber Страницы: 4

Бренд: Parkside Страницы: 55

Бренд: Jackson Grills Страницы: 21

Бренд: ProFire Страницы: 16

Бренд: HOLEMAKER Страницы: 22

Бренд: Weber Страницы: 76

Бренд: Black & Decker Страницы: 9

JDP20EVST-230-PDF

Бренд: Jet Страницы: 32

Бренд: Velleman Страницы: 47

Бренд: Jet Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды