background image

O P T I M U M  

9 4 0 0   S E C O N D   G E N E R A T I O N

 

//

 

1

S A F E T Y   F I R S T

 

WHEN USING ELECTRICAL APPLIANCES, YOU SHOULD ALWAYS BE AWARE OF 
AND FOLLOW BASIC SAFETY PRECAUTIONS INCLUDING:

1. 

Read and follow all instructions and warnings in this manual carefully.

2. 

Unplug the power cord from the power outlet before assembling, disassembling, cleaning or putting 
your hands near any moving parts of the appliance to avoid injury.

3. 

To protect against the risk of injury due to electric shock, do not immerse the base of the Optimum 
9400 Second Generation in water or any other liquid.

4. 

This appliance is not intended for use by persons (including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and knowledge, unless they are supervised or have 
been given instruction concerning the use of the appliance by a person responsible for their safety.

5. 

Do not blend carbonated liquids.

6. 

Do not pour boiling water into the blending jug.

7. 

Do not blend liquids for more than 7 minutes.

8. 

Do not operate the blender if the power cord or plug are damaged, or if it malfunctions or is 
damaged in any way. Return the appliance to the nearest authorised service facility for inspection or 
repair. Do not attempt to repair the appliance yourself to avoid the risk of injury.

9. 

The use of attachments, including canning jars, is not recommended by the manufacturer and 
presents a risk of injury.

10. 

Do not use the blender outdoors.

11. 

Place the appliance on a flat, stable and level surface, away from any water or heat sources and 
avoid hanging the cord over the edge. Do not use the appliance on carpets, towels, plastic, paper, or 
flammable surfaces. 

12. 

Never use your hands or utensils while blending to prevent the risk of injury and damage to the 
appliance. You can use a plastic scraper but only after the blender has come to a full stop.

13. 

Exercise extra care when handling the blades, which are very sharp.

14. 

Never operate the blender without its lid firmly in place.

15. 

Use water to clean the appliance and all detachable parts, which come into direct contact with the 
ingredients, after every use. Do not use abrasive materials, harsh cleansers or corrosive liquids (e.g. 
acids, acetone, etc.) to clean the appliance.

16. 

Never operate the blender without the cushion pad. Replace it if it becomes worn.

17. 

Do not fill the blender above the MAX FILL LINE.

18. 

If the jar overflows during blending. Stop, remove any liquid/ingredients above the MAX FILL LINE, 
and resume blending. Do not operate if overflowing.

19. 

Do not operate the blender in an appliance garage to prevent the risk of injury or fire. When storing 
in an appliance garage, always unplug the unit from the electrical outlet. 

20. 

The use of ear protection is recommended during extended operating periods.

21. 

Ensure the jar and motor couplers are aligned and locked before operating. If unable to lock, remove 
the container and shake the contents before trying again.

22. 

Do not touch the coupling seal after blending as it may be hot.

Содержание 9400 Second Generation

















Отзывы: