Optimum 3290360, Руководство по эксплуатации

Страница: 40 / 92

Operation
Version 1.0.3 - 2020-10-13 40 Translation of original instruction
SD351AV
EN
SD351A
V_G
B
_4.
fm
Use the machine stop for saw cuts
ranging from 0° to +45°.
For saw cuts ranging from 0° to +60° the
machine stop (+45°) needs to be disas-
sembled.
Img.4-8: Angle cut from 0° to +60°

Therefore turn the clamping lever to
the left.

Shift the vice completely to the left
position.

Secure the setting by turning the
clamping lever to the right.
ATTENTION!
Push the vice completely to the left. In
any other position, you possibly cut
into the vice or you possibly damage
the lateral saw blade guidances and the
protective covers.
Img.4-9: Shifting vice
Use the machine stop for saw cuts
ranging from 0° to -30°.
For saw cuts ranging from 0° to -45° the
machine stop (-30°) needs to be disas-
sembled.

Therefore turn the clamping lever to
the left.

Shift the vice completely to the left
position.

Secure the adjustment by turning the
clamping lever to the right.
Img.4-10: Angle cut from 0° to -45°
ATTENTION!
Push the vice completely to the right. In any other position, you possibly cut into the
vice or you possibly damage the lateral saw blade guidances and the protective covers.
Stop +45°
Stop +60°
Vice
Clamping lever
Stop -45°
Stop -30°