Appendix
Version 1.0.6 dated 2021-7-28
Page 56
Translation of the original instructions
GU15
│
GU18
│
GU20
│
GU20S
│
GU20P
│
GU25
│
GU25S
│
GU25P
EN
GU_GUS
_GUP_
G
B.
fm
5.3.3
Disposal of electrical and electronic components
Please make sure that the electrical components are disposed of professionally and according
to the statutory provisions.
The device is composed of electrical and electronic components and must not be disposed of
as household waste. According to the European Directive 2015/863/EU regarding electrical and
electronic used devices and the implementation of national legislation, used power tools and
electrical machines need to be collected separately and supplied to an environmentally friendly
recycling centre.
As the machine operator, you should obtain information regarding the authorised collection or
disposal system which applies for your company.
Please make sure that the electrical components are disposed of professionally and according
to the legal regulations. Please only throw depleted batteries in the collection boxes in shops or
at municipal waste management companies.
5.4
Disposal through municipal collection facilities
Disposal of used electrical and electronic components (Applicable in the countries of the
European Union and other European countries with a separate collecting system for those
devices).
The sign on the product or on its packing indicates that the product must not be handled as
common household waste, but that is needs to be disposed of at a central collection point for
recycling. Your contribution to the correct disposal of this product will protect the environment
and the public health. Incorrect disposal constitutes a risk to the environment and public health.
Recycling of material will help reduce the consumption of raw materials. For further information
about the recycling of this product, please consult your District Office, municipal waste
collection station or the shop where you have purchased the product.
5.5
Product follow-up
We are required to perform a follow-up service for our products which extends beyond
shipment.
We would be grateful if you could send us the following information:
Modified settings
Any experiences with the grinding machine which might be important for other users
Recurring failures of the grinding machine.
5.6
Change information operating manual
Chapter
Short summary
new version number
GU25P spare parts
Shaft sleeve 16mm - 20mm x 25
1.0.2
4.2
Hand extractor in delivery
1.0.3
All
GU1 + Vario drive
1.0.4
CE
EN 62841-3-4:2020-09
1.0.5
1.6
User position when using the sanding belt
1.0.6
