OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.1.3 dated 2016-7-5
Page 14
Original operating instructions
BF46 Vario | BF46TC
GB
WARNING!
Dangerous voltage even if the main switch is switched-off. In the areas marked by the
ideogram in the margin, there might be voltage, even if the main switch is switched off.
1.8.3 Protective cover
The drilling / milling head is equipped with
a protective cover.
WARNING!
Only remove the protective cover
when the mains plug of the drilling-
milling machine is disconnected.
Img.1-4:
Protective cover
1.8.4 Separating protective equipment
Adjust the protective equipment to the
correct height before you start working.
To do so, detach the clamping screw,
adjust the required height and re-tighten
the clamping screw.
A switch is integrated in the fixture of the
spindle protection which monitors that the
cover is closed.
INFORMATION
You cannot start the machine if the spin-
dle protection is not closed.
Img.1-5:
Separating protective equipment
1.9
Safety check
Check the drilling-milling machine in regular intervals.
Check all safety devices
before each operation,
once a week (with the machine in operation),
after every maintenance and repair work.
Protective
cover
Clamping screw
General check
Equipment
Check
OK
Protective covers
Mounted, firmly bolted and not damaged
Signs,
Markings
Installed and legible
