Optimal Power RPS5412, Руководство пользователя

Страница: 14 / 16

11
Next follow the instructions below:

To connect a redundant power supply (RPS) unit to the switch, first turn "OFF"
the NETGEAR® Ethernet switch.

Also, ensure that the power switch on the RPS unit RPS5412 is in "OFF" position.
Important Note: Always Turn "OFF" the AC power first when installing or
removing the RPS from the system. RPS device should not
be live inserted. That is, when AC is "ON" DONOT
connect the RPS cable to the RPS connector on the switch.

When the power is "OFF", you can remove the cover plate on the rear panel of the
NETGEAR® switch as shown on the previous page.

Now connect the RPS DC Connection Cable Model RPSC5412 to the appropriate
NETGEAR® PoE switch making sure the connections are well secured, and the
AC power is "OFF" to the switch and the RPS.

Connect the AC power cord to the RPS unit by plugging the free end of the power
cord into a standard three prong AC outlet.

Ensure that the AC power plug located at the rear end of the power supply is
connected to a clean and well-grounded Universal AC source.

Once all the wires are connected properly, Turn "ON" the rear panel switch for
the RPS (redundant power supply) unit.

The Green LED should light up. Indicating Power supply is “ON” and working
properly. Now the system is ready to operate to its required purpose.
5.2 Maintenance & Safety Instructions
Please use the following safety instructions to ensure your own personal safety and to help
protect your system from potential damage.

The Model RPS5412 should be treated with the sufficient care.

Do not open, service (or) repair any product by yourself.

Do not use abrasives or solvents, as they may mar surfaces.

Do not subject the unit to excessive temperature extremes.

Do not subject the unit to excessive moisture or spilled liquids.

Do not expose your system to direct heat, radiators, rain, dripping or splashing.

Do not subject the unit to sudden or severe shocks.

Never operate the Model RPS5412 with any of the covers removed.

Do not block cooling vents.
WARNING: Observe polarity when making connection to the rear of
RPS Model RPS5412