SmartAmp 20 is shipped without rack mount hardware attached but can be
configured for rack installation using one standard rack ‘ear’ and one half-rack
extension piece as illustrated. The installation and equipment rack should be
configured to provide appropriate ventilation airflow space around the sides and
rear of the amplifier. Ventilation airflow space of at least 25 mm (1 in) should
be maintained along at least one side of the amplifier at all times. Ventilation
apertures are also located on the rear panel of the amplifier and must not be
obstructed. It is important to retain at least 80 mm (3.1 in) free space for airflow
behind the amplifier rear panel.
In addition to rack mount ears, optional rack mount rear support hardware is
available and can be attached to the amplifier. Rear support hardware may
be appropriate if the amplifier is to be used in a mobile rack or potentially be
subject to significant movement. Multiple SmartAmp 20 can also be mechanically
connected using accessory connecting plates.
Installation & Rack Mounting
12/20
SmartAmp
Amplifiers with DSP
Amplifiers
USER GUIDE
© 2021. Optimal Audio Group Ltd. (v1.0)
Introduction
Overview
Start using
Power up
Rear panel
Inputs
Outputs
>
<
Dip switches
GPIO
Installation
Maintenance
Tech specs
Appendix A
Appendix B
Appendix C
Safety info
