9
4.
Press the
Û
button to move to the next zone and re-
peat Step 4 for the remainder of the zones or turn the
dial to the Auto position to activate the automatic
schedule.
5.
Press the
Û
button to move to the next zone. (
NOTE:
To return to Station 1 after the last station, you will
need to press the
Û
key to confirm the entry.)
STEP 5: MANUAL START FOR A CYCLE OR A ZONE
1.
Turn the dial to the Auto position
2.
Press
M
/
A
(MANUAL ON/ADVANCE) button. This will
cause the Station 1 indicator symbol to turn on. The
time the station is scheduled to run will show in the
display and the water on ICON (
S
) will appear.
3.
To advance to the next station press the
M
/
A
button. If
you do not press this button, the unit will run through
each station for the amount of time programmed.
4.
To turn on a specific station, press the
M
/
A
button re-
peatedly until the desired station is indicated.
5.
To turn the unit OFF press either the
M
/
A
button repeat-
edly until time of day is displayed or turn the dial to
the Off position for 15 seconds then return to the Auto
position.
STEP 6: TURN UNIT OFF OR SHUT DOWN FOR RAIN
1.
Turn dial to the Off position. Nothing will be displayed
at this time.
PLEASE NOTE:
When dial is in the "Off" position, there
will be no display. If a battery is installed "AC" will flash
periodically.
STEP 1: SETTING CURRENT DAY AND TIME
TURN DIAL TO Day/Clock POSITION
1.
An indicator symbol will blink under SU. Use the
Ý
or
Þ
arrow button to move the blinking symbol under the
current day. Press the
Û
button to confirm the correct
setting.
2.
The hour numbers will now be flashing. Use the
Ý
or
Þ
arrow button to adjust the hour number to the cur-
rent hour. Press the
Û
button to confirm the correct
setting. Be sure AM or PM is properly showing.
PROGRAMMING THE PC-406 PS
Auto
SU MO TU WE TH FR SA
A
B
C
1 2 3 4 5 6 MANUAL DURATION
S
Day/Clock
