background image

14

MAINTAINING YOUR SYSTEM

1.

Winterize System
For winter months, this mode allows you to preserve
your programmed schedules while the timer is not in
operation: turn the dial to Off. Before shutting it down
for the winter, be sure to drain all water from pipes to
prevent freezing and damage to system. When
restarting timer for the year, turn dial bock to Auto.

WARNING: 

In areas prone to lightning storms, it is rec-

ommended to disconnect wires from the timer's termi-
nal screw strip and to unplug the transformer from the
outlet to protect the timer from lightning caused power
surges.

2.

Battery Back-UP
We recommend that you replace your battery every
year at the same time you change your fire alarm bat-
tery. If frequent power outages occur, you may need
to replace the battery more frequently.

Need Help? Call toll-free: 1 (800) 742-9922
(U.S.A., Canada & Mexico)

Off

For troubleshooting help, contact:

OPTIMA

Customer Support Center

6640 S. Bonney Ave., Tucson, AZ  85706

1 (800) 742-9922

(U.S.A., Canada & Mexico)

PROBLEM

CHECK FOR

Display is Blank

Burned out fuse (replace with 1/2 amp fuse, not included
with timer). Transformer not plugged in. Wall socket not
supplying power, or Timer in OFF position.

"Frozen Display"

Unplug, pull out battery and fuse, and let sit for 30 minutes.

Automatic and Manual Cycles do not turn
water on.

Water source not supplying water. Wires not properly con-
nected. Wires loose or severed. Dial not set to Auto. All
stations turned OFF (to 0 minutes in water duration).

Valve does not shut off after watering at
scheduled time.

Check valve.
Electronic board is "locked on".

Fuse blows out frequently and display goes
blank.

Short in wiring between valve and timer.
Shorted solenoid on 1 or more valves.

Single station does not shut off

Valve is stuck.

Fuse blows as soon as timer is plugged in. Bad transformer, or electrical short in timer.

TROUBLESHOOTING

Содержание PC-306















Отзывы: