Optima DM(DM) Скачать руководство пользователя страница 5

 

Introduction                          

                                

 

The Optima Steamer represents the future of environmentally friendly and effective cleaning. Safe, 
durable and easy to use, the Optima will support your cleaning operations for many years to come. 

 

Intended Applications                                              

 
The Optima Steamer is designed for cleaning surfaces capable of handling steam jet pressure of 

up to 8.5 bar (123.2 psi) and maximum temperatures reaching at 135

  (275

). 

 

The Optima Steamer is capable of cleaning various surfaces including, but not limited to machinery 
/ parts, vehicle exteriors and interiors, engine compartment, glass, metal surfaces, windows, wheel 
wells, vents, kitchenware, remove weeds and much more while simultaneously sanitizing and 
deodorizing with very little water consumption.

 

 

Safety Precautions                                         

Before operating the Optima for the first time, read the manual completely.   
The manufacturer and distributors are not liable for the mechanical troubles, property 
damage,  or personal injury caused by the operator(s) unfamiliarity with the manual’s 
instructions. 

 

 

With regards to the steam vessel, use only water and the manufacturer’s recommended steam 
vessel cleansing solution. Do not put any other chemicals or detergents into the water tank or 
steam vessel. 

 

Do not use distilled water or filtered water under 15 ppm 

 

“Soft” water is recommended. Otherwise, use only clean tap water with anti-scaling solution. 

 

Use only clean diesel. 

 

Provide adequate electrical power requirements accordingly to the specifications. 

 

Make sure that all the switches on the machine are off before plugging the machine into an 
electrical outlet. 

 

If an extension cord is used, make sure it  is  constructed  waterproof and of proper diameter 
based on the cord length and required electrical specifications. 

 

Turn off the POWER (EMERGENCY STOP) and STEAM switches when refilling the fuel tank. 

 

Turn off and unplug the machine from its power source and allow the Optima Steamer to cool 
down before carrying out any maintenance. 

 

Use only hoses, steam-guns and all other accessories recommended by the manufacturer. Use 
manufacturer approved spare parts only. 

 

Use and store the Optima on a leveled up surface only. 

 

Do not use the machine in rain or snow outdoors. The Optima Steamer is not weather-proof or 
water-proof. 

 

Never leave the machine unattended while in use. 

 

Never store the machine below 0

  (32

) or extremely cold weather condition. 

 

In cold climates, do  not allow water to  sit when the Optima is not in use. Do not operate the 
machine if any parts are frozen or suspected of being frozen.   
(See “Freeze Prevention on page13) 

 

Do not use the Optima if any part,  power cord, safety device, hose or spray gun is visually 
damaged or suspected of being damaged. 

Содержание DM(DM)





































Отзывы: