Optilia Flexia BGA, Инструкция по эксплуатации

Страница: 5 / 12

5
3. Mounting Flexia BGA
Remove the lens-protecting caps and attach the BGA lens onto the Flexia
as illustrated.
Assemble Brush Light- and Focusing Stands as illustrated. Mount Flexia
BGA to the stand as illustrated below. BGA lens must be aligned to the
stand base at right angles precisely. Connect the dissipative mat to GND
for ESD-protection. Connect Flexia to Power and monitor (if analogue
sensor) or to USB2.0 port of your PC (if digital sensor). Install Flexia
Digital drivers first, before connecting the device to PC.
2. Gently push the BGA lens
inwards to click. (Snap position).
1. Remove the protecting caps
from Flexia and BGA lens first.
3. Connect to Earth for
secure ESD-protection
2. Lock Brush Light
into its holder
1. Assemble stands
4. Mount Flexia and connect to PC
or Power Supply