Optika 4083.4, Инструкция по эксплуатации

Страница: 4 / 36

Page 4
Product specifications
Sensor 1/3” interline transfer colour CCD element
Horizontal resolution 420 TV lines
Digital resolution 640x480
Total resolution 307k pixel
Objective 8 mm, F:1.2
Sensitivity min. 0,08 lux at F:1.2
Picture controls electronic shutter
Gain control automatic
White balance automatic
Video signal PAL compatible - VHS
Working distance from 0,76 mm to infinite
Magnifications 90x at 0,76 mm (with 21” monitor)
Microphone built-in high sensivity microphone
Audio signal analogic
Power supply 15 V DC, 400 mA, with external power adapter
Switching on via 3-position switch
PC link standard USB 2.0
Length of flexible arm 65cm
Base diameter 17 cm
Weight 3.4 Kg
Assembly
Power supply
The Educam Multimedia video camera requires 15 V DC working voltage and comes with an external power pack. This
power pack needs to be plugged directly into a 220 V mains sockets and its output cable should then be plugged directly into
the video camera power supply socket.
Video and audio signals
The analog video signal from the Educam video camera is transmitted to a TV monitor and the audio signal to an amplifier or
an amplified monitor. The small video/audio output signal cable, that can be found on the back of the camera base, should
be connected as follows:
Red plug (video signal):
into the video input of your monitor/colour TV directly or via the SCART adapter provided (in the yellow video
socket).
Black plug (audio signal):
into the audio input of your amplifier system or into the audio input of your monitor/colour TV or via the SCART
adapter provided (in the white audio mono socket).
Using the SCART adapter, it has to be inserted into the SCART socket at the back of the TV set. See the TV
manufacturer’s instruction manual for details of how to switch on the TV and use its SCART circuit.
Connect the USB cable that can be found on the back of the camera base, to the PC in order to view the digital
USB video signal (follow the instructions on next section to install the camera on your PC).