Opticstar PX-35C CoolAir. © Opticstar Ltd, 2021.
3
Updated: 03/09/2021
Introduction
The PX-35C COOLAIR is an astronomy video camera. It is well suited for imaging
the planets, the Moon and the Sun. The camera is also suitable for microscopy when
fitted with an appropriate attachment.
The PX-35C achieves frame rates of up to
30
frames per second (FPS) at full
resolution: 640x480 pixels, or at 320x240 pixels in Region of Interest (ROI) mode.
The exposure time can be set automatically or manually from 1 millisecond to 4.6
minutes.
Software Support
Two software applications are bundled with the camera:
etAMACAP
and
View
.
EtAMCAP
works under Microsoft’s DirectShow model.
View
, supports the camera
natively offering image processing and measurement functionality.
Package Contents
The following items are included in the package:
•
Opticstar PX-35C COOLAIR video camera with removable C ring
•
In-situ USB 2.0 cable.
•
CS to 1.25” telescope adapter.
•
Software CD.
•
Setup Guide (this document).
System Requirements
The minimum computer system requirements are the following:
•
Windows (32-bit or 64-bit) 7/8/10 with the latest Service Pack.
•
USB 2.0 port for the camera.
Please note that for solar photography, the camera should be
used only with an appropriate solar telescope and/or solar filters.
The camera does not incorporate any optics and therefore it
cannot reach focus by itself. A C/CS mounted lens must be used
with the camera or it must be attached to a telescope with the
nosepiece adapter that is included with the camera. To attach it
to a microscope, please use an appropriate attachment.
