Opticstar PX-35C CoolAir. © Opticstar Ltd, 2021.
12
Updated: 03/09/2021
Camera Control
Run
View
with the camera connected to the
computer. On the right-hand side panel of
the application, under the
Capture
tab, the
camera will be identified as “
Opticstar PX-
35C
”.
By default, the camera will be running as
soon as
View
opens. Typically, to change
the image resolution, the preview must be
stopped by clicking the
Stop Preview
button. This button toggles between
Start
Preview
and
Stop Preview
modes.
However, only the full image resolution is supported for the PX-35C. The region of
interest mode is not possible.
The
Default
button resets the camera settings to the default values.
Frame Rate
In
View
, the maximum camera speed is 25
frames per second (fps). This speed can vary
from one computer to another depending on
the computer’s specification.
Camera Configuration
The exposure time as well all other camera
parameters can be configured by clicking the
Advanced
button. This button is situated
below the
Start Preview / Stop Preview
button.
A window will appear with two tabs:
•
Color Adjust
•
Explosure
The options under each tab are outlined in
the following sections.
Resolution
Frame Rate (max)
640 x 480
25 frames per second
320 x 240 ROI
Not supported
