Opticon PHL-7100, Руководство пользователя

Страница: 106 / 168

OPTICON
User's manual
PHL-7000 series
3-43
3.2.15 Power
ICON ITEM & FUNCTION
•
“ Battery ” Tab ( Figure 3-72 ) :
9
Provide change level indicators for Main battery and Backup
battery .
9
Provide remaining power capacity of main battery.
9
If a “Main Batteries very Low” warning message shows, the
remaining battery life is around 30 minutes before PDT shuts
down. (
Figure 3-76 )
9
The PDT will shutdown if the main batteries capacity is around 0%
9
To exit Battery control panel, press “ OK ” from the command bar, or
press < Enter > key on keypad.
•
“ Schemes ” Tab ( Figure 3-73 ) :
9
The Scheme Tab allows you to determine the time to switch state
to Suspend mode when using either Battery Power or AC Power .
9
Select Battery Power or AC Power as the power scheme from
the pull-down list. ( Figure 3-73 )
9
Select the time to suspend mode from the pull-down list. ( Figure
3-74 )
•
“ Device Status ” Tab ( Figure 3-75 ) :
Provide power level of the device – The power level ranges from
“
High(D0) ” which means the device is at the highest power level to
“ Off(D4) ” which means the device is at the lowest power level.
Note :
This ICON inside the Task Bar shows that AC adapter provides power
to the PDT
The ICON inside the Task Bar shows that Main Batteries provides the
power to the PDT.
The ICON inside the Task Bar shows that AC adapter provides the
power to the PDT and is charging the main batteries..
Table 3-23 Power