68
Select “
TCP/IP Settings
”
(Figure 3-81)
in the “
General
” tab. ensure “
Use Serv-
er-assigned IP address
” is selected. In the “
Name Servers
” tab, ensure “
Use
Server-assigned addresses
” is selected, and select “
OK
”. If you are unable to
connect with these default settings, see your ISP or network administrator for specific
TCP/IP information.
Select the “
Next
” button and type the telephone number.
Select the “
Finish
” button.
The connection you just created appears as an icon in the “
Network and Dial-up Connections
”
folder.
Set up a
point-to-Point Protocol(PPP)
account with an ISP and obtain the following
information:
Access telephone number
User name
Password
Once you have established an account, create a new connection on your device. When creating
this connection, you should be able to use all of the default TCP/IP settings provided in the Make
New Connection Wizard. If you can’t connect using the default settings, contact your ISP or
access your ISP’s Web site for specific TCP/IP information as well as primary and secondary
DNS address.
Modify connection setting
Select
Start > Settings > Control Panel > Network and Dialup Connections
Select the icon for connection settings you want to modify.
Select
File > Properties
, or double- tap the appropriate icon.
Select desired options. There may be additional settings that depend on the connec-
tion. To modify, select the icon and select the icon and select
Advanced Settings
…
from the menu.
Figure -100
Network and Dial-up Connections
Figure -101
Network and Dial-up Connections
